Efficient Steps for HP Deskjet 2600 Wireless Setup

The HP Deskjet 2600 printer is a wireless network supported the printer. Use a broadband internet connection to set up a wireless network connection in the HP Deskjet 2600 printer. Prepare your printer for the HP Deskjet 2600 wireless setup. Follow the quick steps given below to connect the HP Deskjet 2600 printer to a Wi-Fi network in Windows computer or Mac computer.

    HP Deskjet 2600 Wireless Setup Windows

  • Turn on the HP Deskjet 2600 printer by pressing the Power button.
  • Power on the computer and router. Connect the computer to the same wireless network in which you wish to connect the printer.
  • Disconnect any Ethernet or USB cables from the printer and proceed to download printer software from the link given on this site.
  • You can also install the printer drivers from the link given on this site.
  • Choose the connection type as wired or wireless during the installation of the printer software.
  • Run HP Easy Start and select your printer. Choose the option My Printer Is Not Shown.
  • Select Continue and then click Wireless network (if applicable).
  • Click Continue and follow the instructions shown on the screen to complete the setup.
  • On the printer’s control panel, press the Wireless and Information button simultaneously for HP Deskjet 2600 Wireless Setup.
  • A Wireless Test Report will be printed with connection status. If the printer is connected to a Wi-Fi network, continue to print or scan documents on your printer.
  • If the printer is not connected to network, press and hold the Cancel and Wireless buttons at the same time until the Wireless light flashes.
  • Open a document or photo and try printing a sample page.

HP Deskjet 2600 Wireless Setup Mac

  • Power on the HP Deskjet 2600 printer and prepare for wireless installation.
  • Link your computer to the same wireless network in which you wish to connect the printer.
  • Position the 123.hp.com/dj2600 printer closer to the router to get uninterrupted network signals. Detach the USB cable from the printer.
  • Ensure that the Wireless light is blinking on the printer’s control panel.
  • If the Wireless light on the printer’s control panel is not blinking, press and hold the Cancel and Wireless button simultaneously to enable Wireless set up.
  • Proceed to install the printer software on your computer. OpenHP Easy Start and select Set Up My HP Product.
  • Agree to the Terms and agreements of the printer software and click Continue. The Connect screen will display your printer series and code number.
  • Select your printer and click Continue. The Connect screen will display your wireless network and your printer. Click Join to connect the printer and computer.
  • Click Allow when Easy Start requests to access the selected Wi-Fi network on the Mac.
  • Enter the Wi-Fi password and click Continue. Read and follow each setup instruction until the installation completes.
  • Choose HP Easy Scan, HP Essential Software, and other additional software for your printer, and then select Install.
  • Add your printer and print a test page to ensure proper HP Deskjet 2600 wireless setup in Mac.


How To Find HP Deskjet 2600 Wps Pin

  • The WPS pin will be provided to you when you subscribe to an internet service.
  • Search for the WPS pin on your Wi-Fi router. If you cannot find the pin, inspect the paperwork provided during installation to locate the WPS pin by following how to find HP Deskjet 2600 wps pin.
  • The WPS pin may be referred to as WEP, WPA2 password, or WPA key for HP Deskjet 2600 Wireless Setup.
  • The WPS pin can be found from your Windows computer, click on the Wireless tray icon, and then choose the Open Network Sharing Center.
  • Click Change Adapter Settings and right-click on your Wi-Fi name for how to find HP Deskjet 2600 wps pin.
  • Select Status, and then click Wireless Properties. Select the Security tab, and then click Show Characters.
  • Look for the WPS pin referred to as Wireless Network Security Key.
  • In the Mac computer, select the Finder menu and click Utilities. View the KeyChain Access application.
  • Click Local Items in the Keychains List and click Passwords in the Category list.
  • Click on your Wi-Fi name twice, and then select Show password by following how to find HP Deskjet 2600 wps pin.

How To Connect HP Deskjet 2600 To Wifi

To connect the HP Deskjet 2600 wireless Setup printer, you will need an active Wi-Fi connection. Note the network name and password before you begin with the wireless set up. If you have already connected the printer over a USB cable, restore the default settings on the printer.

  • Power On the HP Deskjet 2600 printer and keep is in the ready state.
  • Connect the computer to the same Wi-Fi network in which you wish to connect the printer.
  • Turn on the router and place the printer closer to the router by following how To Connect HP Deskjet 2600 To Wifi.
  • Disconnect the USB or Ethernet cables, if you have already connected.
  • Press the Wireless and Cancel buttons simultaneously for 3 seconds until the Wireless light blinks.
  • Proceed to install the printer software from the link given on this site or you can use the installation CD-ROM to install the drivers.
  • The printer software will include the HP Easy Start by following how To Connect HP Deskjet 2600 To Wifi.
  • Run the HP Easy Start and then click My Printer Is Not Shown. The Printer Not found window appears.
  • Select Continue, and then click Wireless Network (if applicable).
  • Choose Continue and then follow the instructions displayed on the computer screen for HP Deskjet 2600 wireless Setup.