HP Officejet Pro 8610 Ink Cartridge Installation

How to replace the ink cartridge in HP Officejet Pro 8610

To replace your ink cartridge, check the ink level. if the ink level is very low, then you have to replace a Fine cartridge. HP Officejet Pro 860 uses HP 950 (black) and 951 (cyan,magenta,yellow) cartridges. HP 950 and 951 are available in all color. Open the access door and insert the ink cartridge into the holder.

hp-officejet-pro-8610-ink-cartridge-instal


How to change ink in HP Officejet Pro 8610

  • Turn on your HP Officejet Pro 8610 printer.
  • Open the cartridge access door.
  • To remove the ink cartridge, push the ink cartridge forward and pull the ink cartridge from the slots.
  • Wait until the carriage sets in its original position.
  • Remove the new cartridge from its package.
  • Ensure that you remove the orange tape on top of the ink cartridge.
  • Slide the ink cartridge into its appropriate slots. The tri-color goes into the slot on the left and the black on the right.
  • Check if the cartridge set into the holder correctly.
  • Close the cartridge access door.

HP Officejet Pro 8610 ink cartridge problems

  • Ensure that the new ink cartridge is compatible with your printer.
  • Turn on the printer.
  • Clean the ink cartridge with a clean cloth.
  • Remove the cartridge from the slot. Wait until the carriage gets becomes silent.
  • Reinsert the ink cartridge into its slot. Push it forward so that it fits into the holder.
  • Close the ink cartridge access door.
  • Make sure that the ink cartridge contacts are clean.
  • Wait for few seconds and try to print a test page. If the issue is not solved, reset the printer.
  • Unplug the printer from the power cord, wait for few minutes and then, plug the power cord back to the wall outlet.
  • Turn on the printer.
  • Check if the printer is printing. Service your HP Officejet 8610 printer if the problem persists.