You are recommended to use an authentic HP 5530 ink cartridge purchased from the authentic users. Here we provide how to know whether your ink cartridge is authentic or not.
When your locate the toner and scans the QR code the camera on the smart phones you can see the validation screen from the manufacturer.
If the validation screen is not displayed, your HP Envy 5530 Ink cartridge is not authentic.
When you find the ink cartridge which is installed in your printer is not working, you have to trail the instructions provided in this manual to remove and replace it.
Affirm that the printer is powered on. If needed, your an use the power icon to power on the printer. Unlock the printer’s top cover. Leave for a while until the printer regains its idle state.
Push the old ink cartridge down, and swipe it out of the carriage. When placing the cartridge affirm that you are placing the correct toner into its allotted slots.
Free you new toner from its package, and push the pink tab in order to remove the protective cover which is placed on the ink cartridge. Hold the toner in such a way that the copper strips are facing the printer.
Push the ink cartridge slightly at an angle into the cartridge until the HP 5530 ink cartridge rests into the place properly. And then shut the top cover of the printer.
Ink cartridge alignment is necessary to get the best print quality. Affirm that you are placing A4, plain paper into the loading tray. Here are the instructions on how to align the toner once it is installed.
Go to the HP Solution Center using any one of the methods provided in this document. For Windows Vista: go to the Windows task-bar, tap on the Wireless icon, click All programs, and go with the HP Solution Center.
For Windows XP operating system, go to the Windows task bar, tap on the Start option, click All programs, and then HP Solution center. Tap on the settings option, choose Printer Toolbox.
By doing this your 123.hp.com/envy5530 Printer Toolbox screens a dialogue box where you can choose Align the Print Cartridge option.
Choose Align and then trail the on- screen prompts. By doing this the test page gets printed and the ink cartridge gets aligned.
If you find your HP Envy 5530 Ink cartridge to be faulty, you can use the tips provided in this document helps you get rid of the ink cartridge issue.
Take out the cartridge from its slot, check it and then re- insert it into the slots again. Make sure that the cartridge contacts are clean and tidy. Use a clean, link tree cloth to remove dirt present in the cartridge contacts.
Power on the 123 HP Envy 5530 printer using the power button provided on it’s side. Unlock the cartridge access door. By doing this, the carriage displaces to the access area.
Remove the tab which is present on the front of the cartridge in order to release it. Grab the toner by its sides, and then search for the electrical contacts on the bottom of the cartridge.
Check if any ink and debris has accumulated. If yes, clean it using a swab until no debris present on them. Align the cartridge properly until it fits into its slot.
Black HP 5530 ink not printing issue
Though HP Envy 5530 is one of the best printer available in the market, it might also produce some poor quality prints. By that time, it will prompts the black ink not printing alert message on the printer’s control panel.
When your printer experience this issue, the printout is not obtained as targeted. You can sort this issue by using the simple procedure provided in this section.
Major cause of this issue is using the ink cartridge which is not suitable to your printer or the toner you purchased from unauthentic manufacturers.
The print job also fails when the print job assigned to the HP Envy 5530 printer has issue. It is better to delete the print job assigned earlier. Go through the instructions and know how to cancel and resend the print job.
If you find the printouts are not up to the mark, you can cancel already assigned print job, and then choose the appropriate printer. To cancel the print job, tap on the start button.
Go with Search, and enter Devices and printers in the required field. Tap on the printer icon twice, and then double- tap the see whats printing option.
Choose which print job you want to cancel, and then tap on the Document option. Go with Cancel option followed by the yes option just to confirm the changes you do.
To find what the issue is actually about, you can choose an alternate file in the same program to print. Use can also print from any other program either.